[mcclim-cvs] CVS mcclim
crhodes
crhodes at common-lisp.net
Wed Jul 11 15:26:20 UTC 2007
Update of /project/mcclim/cvsroot/mcclim
In directory clnet:/tmp/cvs-serv13045
Modified Files:
bezier.lisp
Log Message:
Bezier designs which draw in the right place in all backends (I think).
The implementation prior to this worked for the replay on an
output-recording stream, and probably worked for the first draw using
the pixmap (fall-through) rendering method. It did not work for the
first draw on a backend with native bezier drawing routines, basically
because the design was being passed through untransformed by the medium
transformation. So:
* define a method on medium-draw-bezier-design* specialized on
transform-coordinates-mixin, to transform the region appropriately
before passing down to backend-drawing functions. This method runs
after the output-recording-stream method, so sadly we're now doing
some transformations twice.
* this implies deleting the translated-bezier-design class, as returning
an object of a different class from transform-region meant that the
idiom of doing
(defmethod medium-draw-foo* :around ((medium t-c-mixin) foo)
(let ((foo (transform-region (medium-transformation medium) foo)))
(call-next-method medium foo)))
would be in violation of the restriction that the set of applicable
methods not change when using call next method.
* deleting the translated-bezier-design class would mean losing the
cacheing of pixmap renderings, so restore that by keeping track of
the original design in all bezier-design subclasses, and use that in
ensure-pixmap.
* this on its own is still too slow, so for bezier-areas and
bezier-unions additionally keep track of accumulated
translation transformations, only performing the transformation of
individual segments or areas when they are necessary. (A similar
approach could be used for differences, but I ran out of energy; we
have however recovered most of the speed loss from the introduction of
this extra correctness.)
* the Postscript and gtkairo backends, with their medium-draw-bezier*
methods, needed some adjustment to perform the transformations
themselves.
Please test!
--- /project/mcclim/cvsroot/mcclim/bezier.lisp 2006/12/26 16:44:45 1.1
+++ /project/mcclim/cvsroot/mcclim/bezier.lisp 2007/07/11 15:26:20 1.2
@@ -56,7 +56,8 @@
(- (* (realpart z) (point-y v))
(* (imagpart z) (point-x v))))
-(defclass bezier-design (design) ())
+(defclass bezier-design (design)
+ ((%or :accessor original-region :initform nil)))
(defgeneric medium-draw-bezier-design* (stream design))
@@ -80,6 +81,12 @@
(when (stream-drawing-p stream)
(medium-draw-bezier-design* medium design)))))
+(defmethod medium-draw-bezier-design* :around
+ ((medium transform-coordinates-mixin) design)
+ (let* ((tr (medium-transformation medium))
+ (design (transform-region tr design)))
+ (call-next-method medium design)))
+
(defmethod replay-output-record ((record bezier-design-output-record) stream &optional
(region +everywhere+) (x-offset 0) (y-offset 0))
(declare (ignore x-offset y-offset region))
@@ -108,12 +115,12 @@
(values min-x min-y max-x max-y)))
(defclass segments-mixin (bounding-rectangle-mixin)
- ((%segments :initarg :segments :initform '() :reader segments)))
+ ((%segments :initarg :segments :initform '() :reader %segments)))
-(defun compute-bounding-rectangle* (segments-mixin)
+(defmethod compute-bounding-rectangle* ((segments-mixin segments-mixin))
(multiple-value-bind (final-min-x final-min-y final-max-x final-max-y)
- (segment-bounding-rectangle (car (segments segments-mixin)))
- (loop for segment in (cdr (segments segments-mixin))
+ (segment-bounding-rectangle (car (%segments segments-mixin)))
+ (loop for segment in (cdr (%segments segments-mixin))
do (multiple-value-bind (min-x min-y max-x max-y)
(segment-bounding-rectangle segment)
(setf final-min-x (min final-min-x min-x)
@@ -171,7 +178,7 @@
(make-instance 'bezier-curve
:segments (mapcar (lambda (segment)
(transform-segment transformation segment))
- (segments path))))
+ (%segments path))))
(defmethod region-equal ((p1 point) (p2 point))
(let ((coordinate-epsilon (* #.(expt 2 10) double-float-epsilon)))
@@ -179,49 +186,33 @@
(<= (abs (- (point-y p1) (point-y p2))) coordinate-epsilon))))
(defmethod region-union ((r1 bezier-curve) (r2 bezier-curve))
- (let ((p (slot-value (car (last (segments r1))) 'p3))
- (seg (car (segments r2))))
+ (let ((p (slot-value (car (last (%segments r1))) 'p3))
+ (seg (car (%segments r2))))
(if (region-equal p (slot-value seg 'p0))
(with-slots (p1 p2 p3) seg
(make-instance 'bezier-curve
- :segments (append (segments r1)
+ :segments (append (%segments r1)
(cons (make-bezier-segment p p1 p2 p3)
- (cdr (segments r2))))))
+ (cdr (%segments r2))))))
(call-next-method))))
-;;; A region that translates a different region
-(defclass translated-bezier-design (region bezier-design)
- ((%translation :initarg :translation :reader translation)
- (%region :initarg :region :reader original-region)))
-
-(defmethod bounding-rectangle* ((region translated-bezier-design))
- (let ((translation (translation region)))
- (multiple-value-bind (min-x min-y max-x max-y)
- (bounding-rectangle* (original-region region))
- (multiple-value-bind (final-min-x final-min-y)
- (transform-position translation min-x min-y)
- (multiple-value-bind (final-max-x final-max-y)
- (transform-position translation max-x max-y)
- (values final-min-x final-min-y final-max-x final-max-y))))))
-
-(defgeneric really-transform-region (transformation region))
-
;;; an area defined as a closed path of Bezier curve segments
-(defclass bezier-area (area bezier-design segments-mixin bounding-rectangle-mixin) ())
+(defclass bezier-area (area bezier-design segments-mixin bounding-rectangle-mixin)
+ ((%trans :initarg :transformation :reader transformation :initform +identity-transformation+)))
(defgeneric close-path (path))
(defmethod close-path ((path bezier-curve))
- (let ((segments (segments path)))
+ (let ((segments (%segments path)))
(assert (region-equal (slot-value (car segments) 'p0)
(slot-value (car (last segments)) 'p3)))
(make-instance 'bezier-area :segments segments)))
(defun path-start (path)
- (slot-value (car (segments path)) 'p0))
+ (slot-value (car (%segments path)) 'p0))
(defun path-end (path)
- (slot-value (car (last (segments path))) 'p3))
+ (slot-value (car (last (%segments path))) 'p3))
(defun make-bezier-area (point-seq)
(assert (region-equal (car point-seq) (car (last point-seq))))
@@ -232,18 +223,26 @@
(coordinate= (cadr coord-seq) (car (last coord-seq)))))
(make-bezier-thing* 'bezier-area coord-seq))
-(defmethod really-transform-region (transformation (area bezier-area))
- (make-instance 'bezier-area
- :segments (mapcar (lambda (segment)
- (transform-segment transformation segment))
- (segments area))))
+(defmethod segments ((area bezier-area))
+ (let ((tr (transformation area)))
+ (mapcar (lambda (s) (transform-segment tr s)) (%segments area))))
(defmethod transform-region (transformation (area bezier-area))
- (if (translation-transformation-p transformation)
- (make-instance 'translated-bezier-design
- :translation transformation
- :region area)
- (really-transform-region transformation area)))
+ (let* ((tr (transformation area))
+ (result (if (translation-transformation-p transformation)
+ (make-instance 'bezier-area :segments (%segments area)
+ :transformation
+ (compose-transformations transformation tr))
+ (make-instance 'bezier-area
+ :segments (mapcar (lambda (s) (transform-segment transformation s)) (segments area))))))
+ (when (translation-transformation-p transformation)
+ (setf (original-region result) (or (original-region area) area)))
+ result))
+
+(defmethod compute-bounding-rectangle* ((area bezier-area))
+ (multiple-value-bind (lx ly ux uy) (call-next-method)
+ (let ((tr (transformation area)))
+ (transform-rectangle* tr lx ly ux uy))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;
@@ -251,20 +250,20 @@
;;; A union of bezier areas. This is not itself a bezier area.
(defclass bezier-union (area bezier-design)
- ((%areas :initarg :areas :initform '() :reader areas)))
-
-(defmethod really-transform-region (transformation (area bezier-union))
- (let ((areas (loop for area in (areas area)
- collect (transform-region transformation area))))
- (make-instance 'bezier-union
- :areas areas)))
+ ((%trans :initarg :transformation :reader transformation :initform +identity-transformation+)
+ (%areas :initarg :areas :initform '() :reader areas)))
-(defmethod transform-region (transformation (area bezier-union))
- (if (translation-transformation-p transformation)
- (make-instance 'translated-bezier-design
- :translation transformation
- :region area)
- (really-transform-region transformation area)))
+(defmethod transform-region (transformation (union bezier-union))
+ (let* ((tr (transformation union))
+ (new-tr (compose-transformations transformation tr))
+ (result (if (translation-transformation-p transformation)
+ (make-instance 'bezier-union :areas (areas union)
+ :transformation new-tr)
+ (make-instance 'bezier-union
+ :areas (loop for area in (areas union) collect (transform-region new-tr area))))))
+ (when (translation-transformation-p transformation)
+ (setf (original-region result) (or (original-region union) union)))
+ result))
(defun bounding-rectangle-of-areas (areas)
(multiple-value-bind (final-min-x final-min-y final-max-x final-max-y)
@@ -279,43 +278,57 @@
(values final-min-x final-min-y final-max-x final-max-y)))
(defmethod bounding-rectangle* ((design bezier-union))
- (bounding-rectangle-of-areas (areas design)))
+ (multiple-value-bind (lx ly ux uy)
+ (bounding-rectangle-of-areas (areas design))
+ (transform-rectangle* (transformation design) lx ly ux uy)))
(defmethod region-union ((r1 bezier-area) (r2 bezier-area))
- (make-instance 'bezier-union
- :areas (list r1 r2)))
+ (make-instance 'bezier-union :areas (list r1 r2)))
(defmethod region-union ((r1 bezier-union) (r2 bezier-area))
- (make-instance 'bezier-union
- :areas (cons r2 (areas r1))))
+ (let ((tr (transformation r1)))
+ (make-instance 'bezier-union
+ :areas (cons (untransform-region tr r2) (areas r1))
+ :transformation tr)))
(defmethod region-union ((r1 bezier-area) (r2 bezier-union))
- (make-instance 'bezier-union
- :areas (cons r1 (areas r2))))
+ (let ((tr (transformation r2)))
+ (make-instance 'bezier-union
+ :areas (cons (untransform-region tr r1) (areas r2))
+ :transformation tr)))
(defmethod region-union ((r1 bezier-union) (r2 bezier-union))
- (make-instance 'bezier-union
- :areas (append (areas r1) (areas r2))))
+ (let ((tr1 (transformation r1))
+ (tr2 (transformation r2)))
+ (if (transformation-equal tr1 tr2)
+ (make-instance 'bezier-union
+ :areas (append (areas r1) (areas r2))
+ :transformation tr1)
+ (let ((len1 (length (areas r1)))
+ (len2 (length (areas r2))))
+ (if (> len2 len1)
+ (make-instance 'bezier-union
+ :areas (append (mapcar (lambda (r) (untransform-region tr2 (transform-region tr1 r))) (areas r1)) (areas r2))
+ :transformation tr2)
+ (make-instance 'bezier-union
+ :areas (append (mapcar (lambda (r) (untransform-region tr1 (transform-region tr2 r))) (areas r2)) (areas r1))
+ :transformation tr1))))))
(defclass bezier-difference (area bezier-design)
((%positive-areas :initarg :positive-areas :initform '() :reader positive-areas)
(%negative-areas :initarg :negative-areas :initform '() :reader negative-areas)))
-(defmethod really-transform-region (transformation (area bezier-difference))
- (let ((pareas (loop for area in (positive-areas area)
- collect (transform-region transformation area)))
- (nareas (loop for area in (negative-areas area)
- collect (transform-region transformation area))))
- (make-instance 'bezier-difference
- :positive-areas pareas
- :negative-areas nareas)))
-
(defmethod transform-region (transformation (area bezier-difference))
- (if (translation-transformation-p transformation)
- (make-instance 'translated-bezier-design
- :translation transformation
- :region area)
- (really-transform-region transformation area)))
+ (let* ((pareas (loop for area in (positive-areas area)
+ collect (transform-region transformation area)))
+ (nareas (loop for area in (negative-areas area)
+ collect (transform-region transformation area)))
+ (result (make-instance 'bezier-difference
+ :positive-areas pareas
+ :negative-areas nareas)))
+ (when (translation-transformation-p transformation)
+ (setf (original-region result) (or (original-region area) area)))
+ result))
(defmethod bounding-rectangle* ((design bezier-difference))
(bounding-rectangle-of-areas (positive-areas design)))
@@ -326,19 +339,23 @@
:negative-areas (list r2)))
(defmethod region-difference ((r1 bezier-area) (r2 bezier-union))
- (make-instance 'bezier-difference
- :positive-areas (list r1)
- :negative-areas (areas r2)))
+ (let ((tr (transformation r2)))
+ (make-instance 'bezier-difference
+ :positive-areas (list r1)
+ :negative-areas (mapcar (lambda (r) (transform-region tr r)) (areas r2)))))
(defmethod region-difference ((r1 bezier-union) (r2 bezier-area))
- (make-instance 'bezier-difference
- :positive-areas (areas r1)
- :negative-areas (list r2)))
+ (let ((tr (transformation r1)))
+ (make-instance 'bezier-difference
+ :positive-areas (mapcar (lambda (r) (transform-region tr r)) (areas r1))
+ :negative-areas (list r2))))
(defmethod region-difference ((r1 bezier-union) (r2 bezier-union))
- (make-instance 'bezier-difference
- :positive-areas (areas r1)
- :negative-areas (areas r2)))
+ (let ((tr1 (transformation r1))
+ (tr2 (transformation r2)))
+ (make-instance 'bezier-difference
+ :positive-areas (mapcar (lambda (r) (transform-region tr1 r)) (areas r1))
+ :negative-areas (mapcar (lambda (r) (transform-region tr2 r)) (areas r2)))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;
@@ -369,7 +386,7 @@
(%polygonalize p0 p1 p2 p3)))
(defmethod polygonalize ((path bezier-curve))
- (let ((segments (segments path)))
+ (let ((segments (%segments path)))
(make-polyline
(cons (slot-value (car segments) 'p0)
(mapcan #'polygonalize segments)))))
@@ -390,11 +407,12 @@
(defmethod reverse-path ((path bezier-curve))
(make-instance 'bezier-curve
- :segments (reverse (mapcar #'reverse-segment (segments path)))))
+ :segments (reverse (mapcar #'reverse-segment (%segments path)))))
(defmethod reverse-path ((path bezier-area))
(make-instance 'bezier-area
- :segments (reverse (mapcar #'reverse-segment (segments path)))))
+ :segments (reverse (mapcar #'reverse-segment (%segments path)))
+ :transformation (transformation path)))
;;; slanting transformation are used by Metafont
(defun make-slanting-transformation (slant)
@@ -574,7 +592,7 @@
(defmethod convolute-regions ((area bezier-area) (path bezier-curve))
(let ((polygon (polygonalize area)))
(make-instance 'bezier-union
- :areas (loop for segment in (segments path)
+ :areas (loop for segment in (%segments path)
append (convolute-polygon-and-segment area polygon segment)))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
@@ -670,9 +688,6 @@
(defmethod positive-negative-areas ((design bezier-difference))
(values (positive-areas design) (negative-areas design)))
-(defmethod positive-negative-areas ((design translated-bezier-design))
- (positive-negative-areas (original-region design)))
-
(defun render-to-array (design)
(multiple-value-bind (positive-areas negative-areas)
(positive-negative-areas design)
@@ -695,9 +710,6 @@
(render-polygon result polygon 1 min-x min-y)))
result))))
-(defparameter *x* 0)
-(defparameter *y* 0)
-
(defparameter *pixmaps* (make-hash-table :test #'equal))
(defun resolve-ink (medium)
@@ -715,8 +727,9 @@
(defgeneric ensure-pixmap (medium design))
-(defmethod ensure-pixmap (medium design)
- (let ((pixmap (gethash (list (medium-sheet medium) (resolve-ink medium) design)
+(defmethod ensure-pixmap (medium rdesign)
+ (let* ((design (or (original-region rdesign) rdesign))
+ (pixmap (gethash (list (medium-sheet medium) (resolve-ink medium) design)
*pixmaps*)))
(when (null pixmap)
(let* ((picture (render-to-array design))
@@ -743,17 +756,21 @@
pixmap)))
pixmap))
-(defmethod ensure-pixmap (medium (design translated-bezier-design))
- (ensure-pixmap medium (original-region design)))
-
(defun render-through-pixmap (design medium)
(multiple-value-bind (min-x min-y)
(bounding-rectangle* design)
- (setf min-x (floor min-x)
- min-y (floor min-y))
- (let ((pixmap (ensure-pixmap medium design)))
- (copy-from-pixmap pixmap 0 0 (pixmap-width pixmap) (pixmap-height pixmap)
- (medium-sheet medium) (+ *x* min-x) (+ *y* min-y)))))
+ ;; the design we've got has already been transformed by the
+ ;; medium/user transformation, and COPY-FROM-PIXMAP is in user
+ ;; coordinates. So we need to transform back (or set the medium's
+ ;; transformation to be +IDENTITY-TRANSFORMATION+ temporarily, but
+ ;; that's even uglier)
+ (multiple-value-bind (utmin-x utmin-y)
+ (untransform-position (medium-transformation medium) min-x min-y)
+ (setf min-x (floor utmin-x)
+ min-y (floor utmin-y))
+ (let ((pixmap (ensure-pixmap medium design)))
+ (copy-from-pixmap pixmap 0 0 (pixmap-width pixmap) (pixmap-height pixmap)
+ (medium-sheet medium) min-x min-y)))))
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;
@@ -778,73 +795,6 @@
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;
-;;; Special cases on region-union and region-intersection
-
-(defmethod region-union ((r1 translated-bezier-design) (r2 bezier-curve))
- (region-union (really-transform-region (translation r1) (original-region r1)) r2))
-
-(defmethod region-union ((r1 translated-bezier-design) (r2 bezier-area))
[64 lines skipped]
More information about the Mcclim-cvs
mailing list